Paint Remover, 240ml
Description
Use this Paint Remover to strip acrylic, enamel, and lacquer paints. Suitable for plastic, resin, and metal miniatures.
Product's details
2020
Weight: 250 g
Volume: 240 ml
8436574504620
47651
Reviews
204,6 (20 reviews)
Miniature painting is a creative hobby that teaches you so much along the way. This product is perfect for those early attempts that don't look quite right anymore :)
Now you can strip the paint, start fresh, and apply everything you've learned.
the miniature painting is a very creative hobby that teaches you many new things on the way. this product is for the early attempts that no longer look good :)
You can now erase and try again applying what you have learned
I used the paint remover on a palette where I had left dried paint for a long time. I left the product on the palette for about an hour and a half, even though the instructions recommend a longer time. However, I couldn't stand the smell of the remover, which drifted from the balcony into the apartment. Despite that, I am pleasantly surprised by the result. The remover claims to be reusable, but it gets stained by the removed paint, so you definitely won't want to pour it back into the original bottle with the unused product.
Paint remover som použila na paletu, na ktorej som dlhodobo nechávala zaschnutú farbu po maľovaní. Prípravok som na palete nechala asi hodinu a pol - v návode sa odporúča dlhšia doba. Nevydržala som však zápach odstraňovača, ktorý sa aj z balkóna naťahal do bytu. Napriek tomu som príjemne prekvapená z výsledku. Odstraňovač tvrdí, že je znovupoužiteľný, zafarbí sa ale od odstraňovaných farieb, takže ho isto nebudete chcieť naliať do pôvodnej fľaštičky k tomu nepoužitému.
Works 100%. The model in the picture was poorly sprayed with white primer. I didn't need to soak it as long as recommended, and the paint remover doesn't even smell that bad:)
Funguje na 100%. Na obrázku model špatně stříknutý bílým primerem. Nebylo třeba namáčet tak dlouho jako je doporučeno a odstraňovač barev ani tolik nesmrdí:)
I let it sit for about three hours, then spent three minutes gently brushing it, and about 98% of the paint is gone. There are a few spots with primer residue, but I'm going to re-prime those anyway.
Zhruba tři hodiny jsem nechal působit potom asi tři minuty jemného kartáčování a cca 98% barvy je pryč, na pár místech zůstaly zbytky primeru, ale to stejně znovu přestříkám
Based on positive reviews, I bought this product and tested it to remove a black base coat and a white (Army Painter spray) zenithal highlight. During the first coat on the cloak, grainy particles caused by the white spray were visible on the model. I don't recommend using the white Army Painter spray for this. I decided to strip the paint from the figure. I followed the instructions on the packaging, left the figure in the bath for 5-6 hours, and cleaned off the paint residue with a regular brush from a stationery store. I then rinsed the figure several times with water. See the photo for the result. Not only did a map of lines form on the surface, but the base even cracked. I'm disappointed with the result. I'll try to fix it and re-prime it with black, but I'm afraid this figure is doomed :(
Na základě pozitivní hodnocení, jsem si produk pořídil a vyzkoušel pro odstranění základové černé barvy a bílé (sprej Army Painter) zenithal-highlight. Během prvního nátěru pláště byly na modelu patrné zrnité částice způsobené právě bílým sprejem. Což tedy taky rovnou nedoporučuji s bílým sprejem od Army Painter dělat. Rozhodl jsem se tedy figurku odbarvit. Postupoval jsem podle návodu na obalu, figurku ponechal v lázni 5-6h a po vynoření čistil zbytky barvy obyčejným štetecem z papírnictví. Figurku následně několikrát opláchl vodu. Výsledkem viz foto. Nejen že se mi po povrchu vytvořila jakási mapa čar, dokonce i praskl podstavec. Z výsledku jsem zklamán. Zkusím ještě nějak opravit a znovu stříknout černý základ, ale obávám se toho, že je tato figurku odsouzena k záhubě :(
1 - 10 reviews from 20